Soundproofing Tips

The Soundproofing Education has assembled several articles and data that hopefully will give you a better understanding of the soundproofing challenges you face.

What is Noise?

Noise is unwanted sound which may be hazardous to health, interfere with speech and verbal communications or is otherwise disturbing, irritating or annoying.

What is Sound?

Sound is defined as any pressure variation in air, water or other fluid medium which may be detected by the human ear.

What are the characteristics of sound?

The two most important characteristics which must be known in order to evaluate the sound or noise are it’s amplitude and frequency. The amplitude or height of the sound wave from peak to valley determines the loudness or intensity. The wave length determines the frequency, pitch or tone of the sound.

What are wavelengths?

Sound wavelengths are the linear measurement of one full cycle of displacement where the motion of air molecules is first compressed and then rare-field or expanded. The wavelength is determined by the ratio of the speed of sound to the frequency.

How are these characteristics expressed?

The frequency of sound is expressed in wavelengths per second or cycles per second (CPS). It is more commonly referred to as Hertz. Low frequency noise is 250 Hertz (Hz) and below. High frequency noise is 2000 Hz and above. Mid-frequency noise falls between 250 and 2000 Hz.

The amplitude of sound is expressed in decibels (dB). This is a logarithmic compressed scale dealing in powers of 10 where small increments in dB correspond to large changes in acoustic energy.

What are octave bands?

Standardized octave bands are groups of frequencies named by the center frequency where the upper limit is always twice the lower limit of the range. Test data for performance of acoustical materials is standardized for easy comparison at the center frequencies. Equipment noise levels and measurement devices (dB meters) also follow the preferred octave bands.

What Is the difference between dB and dBA?

dB sound pressure levels are unweighted. dBA levels are “A” weighted according to the weighting curves to approximate the way the human ear hears. For example, a 100 dB level at 100 Hz will be perceived to have a loudness equal to only 80 dB at 1000 Hz. The dBA scale is based on a child’s hearing and was originally documented based on actual hearing tests to characterize the human ear’s relative response to noise.

What is impulse noise?

Impulse noise is a short duration transient acoustic event characterized by a sudden rise or spike in sound pressure followed by a uniform or oscillatory decay (depends on type of source equipment) lasting less than 1/2 second. Impulse noise usually exhibits a distinct spectral signature across the frequency range without the presence of discrete tones. Examples of impulse noise include gunshots, pulse cleaning systems, punch presses, etc.

What is the audible range?

At birth, the audible frequency range is 20 Hz to 20,000 Hz. Generally speaking the average audible range in humans is from 30 Hz to 17,000 Hz. Sound pressure wave forms below and above this range are described as infrasonic and ultrasonic. Infrasonic sound is experienced as a flutter while ultrasonic sound produces no sensation of hearing.

What is diffraction?

Diffraction of sound is “bending” of the pressure wave around objects, obstacles and walls. Diffraction is greatest with low frequency sound or where the wavelength is large compared to the object it strikes. As illustrated above, diffraction of sound results in a less pronounced acoustic shadow zone.